47. Ahn, J. 2022, Large Eddy Simulation of Film Cooling: A Review, Energies 15(23), 8876. (SCI, Feature Paper)

46. Miyazaki T, Enoki K, Ahn J. 2022 Special Issue on Sciences and Innovations in Heat Pump/Refrigeration: Volume II. Applied Sciences 12(20):10630. (SCI) 

45. Chun, Y.H, and Ahn J. 2022, Optimizing the Geometric Parameters of a Stepped Labyrinth Seal to Minimize the Discharge Coefficient. Processes 10(10), 2019. (SCI, Editor's Choice).

44. Ahn, J.,Song, J.C., and Lee. J.S. 2022. Large Eddy Simulation of Conjugate Heat Transfer in a Ribbed Channel: Reynolds Number Effect, Processes 10(10), 1928. (SCI, Editor's Choice).

43. Fakhrulrezza, M., Ahn, J. and Lee, H,-J., 2022, Thermal Design of a Biohydrogen Production System Driven by Integrated Gasification Combined Cycle Waste Heat Using Dynamic Simulation, Energies 15(9), 2976 (SCI).

42. Baek, S.I. and Ahn, J., 2022, Effects of Bulk Flow Pulsation on Film Cooling Involving Compound Angle, Energies 15(7), 2643 (SCI).

41. Seon, G., Ahn, J. and Hwang, W., 2022, Analysis of the Impact of Flow Characteristics on the Separation Efficiency and Pressure Drop of a Cyclone-type Oil Separator, J. Mech. Sci. Tech. 36(1), pp.273~283. (SCI).

40. Kim, J.-H. and Ahn, J., 2021, Large Eddy Simulation of Leakage Flow in a Stepped Labyrinth SealProcesses 9(12), 2179 (SCI. Feature Paper, Editor's Choice).

39. Baek, S.I. and Ahn, J., 2021, Large Eddy Simulation of Film Cooling Involving Compound Angle Hole with Bulk Flow PulsationEnergies 14(22), 7659 (SCI, Feature Paper).

38. Ahn, J., Song, J.C. and Lee, J.S., 2021, Dependence of Conjugate Heat Transfer in Ribbed Channel on Thermal Conductivity of Channel Wall: An LES Study, Energies 14(8), 5698 (SCI).

37. Ahn, J., and Kim, H.J., 2021, Combustion Characteristics of 0.5 MW Class Oxy-fuel FGR (Flue Gas Recirculation) Boiler for CO2 Capture, Energies 14(14), 4333 (SCI).

36. Ahn, J., Song, J.C. and Lee, J.S., 2021, Fully Coupled Large Eddy Simulation of Conjugate Heat Transfer in a Ribbed Channel with a 0.1 Blockage Ratio, Energies 14(8), 2096 (SCI).

35. Baek, S.I., Ryu, J. and Ahn, J., 2021, Large Eddy Simulation of Film Cooling with Forward Expansion Hole: Comparative Study with LES and RANS Simulations, Energies 14(8), 2063 (SCI).

34. Kim J.H. and Ahn, J., 2021, Performance Analysis of Hybrid Desiccant Cooling System with Enhanced Dehumidification Capability Using TRNSYS, Applied Sciences 11(7), 3236 (SCI).

33. Baek, S.I. and Ahn, J., 2021, Effects of Bulk Flow Pulsations on Film Cooling with Two Sister HolesApplied Sciences 11(4), 1537 (SCI).

32. Baek, S.I. and Ahn, J., 2021, Optimizing the Geometric Parameters of a Straight‐Through Labyrinth Seal to Minimize the Leakage Flow Rate and the Discharge Coefficient, Energies 14(3), 705 (SCI).

30. Baek, S.I. and Ahn, J., 2020, Large Eddy Simulation of Film Cooling with Bulk Flow Pulsation: Comparative Study of LES and RANSApplied Sciences 10(23), 8553 (SCI).

29. Baek, S.I. and Ahn, J., 2020, Large Eddy Simulation of Film Cooling with Triple Holes: Injectant Behavior and Adiabatic Film-Cooling Effectiveness, Processes 8(11), 1443 (SCI).

27. Ahn, J. and Kim, H.J., 2020, Combustion Process of a Korean Wood Pellet at a Low Temperature, Renewable Energy 145, 391-398 (SCI).

26. Ahn, J., Kim, M.S. and Jang, S., 2018, Effects of Cross-sectional Aspect Ratio of V-Shaped Ribs and Blockage Ratio on Heat Transfer in a Channel at a Low Reynolds Number, J. Mech. Sci. Tech. 32(11), pp.5465~5473. (SCI-E).

25. Ahn, J. and Jang, J.H., 2018, Combustion Characteristics of a 16 Step Grate-Firing Wood Pellet Boiler, Renewable Energy 129, 678-685 (SCI).

24. Kim. M.S., Chung, J.D., Ahn, J. and Yoshida, H., 2018, In Celebration of Joon Sik Lee on his 65th Birthday, Int. J. Heat Mass Transfer 121, pp. 1376~1377 (SCI).

23. Ahn, J. and Jang, S., 2018, Effects of Oil Wettability on the Performance of a Cyclone-Type Oil Separator, Int. J. Air-Conditioning and Refrigeration 26(1), 18500010 (SCOPUS).

22. Ahn, J. and Jang, J.H., 2018, Combustion and Heat Transfer Characteristics of a 13 Step Grate-Firing Wood Pellet Boiler, J. Mech. Sci. Tech. 32(3) pp.1033~1040 (SCI-E).

21. Song, J.C., Ahn, J. and Lee, J.S., 2017, An Immersed-Boundary Method for Conjugate Heat Transfer Analysis, J. Mech. Sci. Tech. 31(5), pp. 2287~2294 (SCI-E).

20. Seon, G. and Ahn, J., 2016, Design of inlet port of the cyclone-type oil separator using CFD, Int. J. Air-Conditioning and Refrigeration 24(4), 16500025 (SCOPUS).

19. Sumit, B., Kim, Y., Ahn, J. and Lim, S.H., 2016, Fabrication of a Superamphiphilic SS-400 Oil Separator Surface using a Ag-doped ZnO Nanorod Coating, Sci. Adv. Material 8(8), pp. 1595-1602 (SCI-E).

18. Ahn, J. and Kim, H.J., 2016, Heat Transfer and Pressure Drop of a Gasket-Sealed Plate Heat Exchanger Depending on Operating Conditions across Hot and Cold Sides, J. Mech. Sci. Tech. 30(5), pp. 2325-2333 (SCI-E).

17. Ahn, J. and Kim, S.Y., 2016, Performance of Novel High Temperature Heat Exchanger for 1 kW Class Stirling Engine Considering Heat Recovery, Int. J. Air-Conditioning and Refrigeration 24(1), 16500007 (SCOPUS).

16. Ahn, J., Kim, J.Y. and Kang, B.H., 2016, Performance of a Hybrid Desiccant Cooling System in a Residential Environment, Heat Transfer Engineering, 37 (7/8) pp. 633-639 (SCI-E).

15. Jang, S.I., Ahn, J. and Lim, S.H., 2015, Performance of Oil-Separator Adopting Nature-inspired Surface, Int. J. Precision Engineering and Manufacturing, 16(10) pp. 2205-2211 (SCI-E).

14. Ahn, J., and Kim, J.J., 2014, Combustion and Heat Transfer Characteristics inside the Combustion Chamber of a Wood Pellet Boiler, J. Mech. Sci. Tech. 28(2), pp. 789~795 (SCI-E).

13. Kim, H.J., Lee, Y.S. and Ahn, J., 2013, Combustion Simulation of 1kW Class LNG Stirling Engine CHP System Considering Heat Recovery, Int. J. Air-Conditioning and Refrigeration 21(1), 1350007 (SCOPUS).

12. Lee, D., Ahn, J. and Shin, S., 2013, Uneven Longitudinal Pitch Effect on Tube Bank Heat Transfer in Cross Flow, Applied Thermal Engineering 51. pp. 937~947 (SCI-E).

11. Lee, Y.O., Ahn, J. and Lee, J.S., 2012, Effects of Dimple Arrangements on the Turbulent Heat Transfer in a Dimpled Channel, Int. J. Enhanced Heat Transfer 19(4), pp. 359~367 (SCI-E).

10. Ahn, J. and Kim, H.J., 2011, Combustion and Heat Transfer Characteristics at the Combustion Chamber of an Oxy-fuel Boiler for CO2 Capturing: a Numerical Simulation, Progress in CFD 11(3), pp. 210-215 (SCI-E).

9. Ahn, J., Kim, H.J. and Choi, K.S., 2010, Oxy-fuel Combustion Boiler for CO2 Capturing: 50kW-Class Model Test, J. Mech. Sci. Tech. 24(10), pp. 2135~2141 (SCI-E).

8. Ahn, J. and Lee, J.S., 2010, Large Eddy Simulation of Flow and Heat Transfer in a Channel with a Detached Rib Array, Int. J. Heat Mass Transfer 53, pp. 445~452 (SCI).

7. Ahn, J., Kim, H.J. and Choi, K.S., 2009, Combustion Characteristics of Oxy-fuel Burnrs for CO2 Capturing Boilers, JSME J. Thermal Sci. Tech. 4(3), pp. 418~413 (SCI).

6. Kim, H.J, Ahn, J. and Choi, K.S., 2009, Melting/Gasification Characteristics of Pellet Fuel for a Waste Plastic Firing System, Int. J. Transport Phenomena 11, pp. 51~62.

5. Lee, Y.O., Ahn, J. and Lee, J.S., 2008, Effects of Dimple Depth and Reynolds Number on the Turbulent Heat Transfer in a Dimpled Channel, Progress in CFD 8(7), pp. 432~438 (SCI-E).

4. Ahn, J., Choi, H. and Lee, J.S., 2007, Large Eddy Simulation of Flow and Heat Transfer in a Rotating Ribbed Channel, Int. J. Heat Mass Transfer 50, pp. 4937~4947 (SCI).

3. Ahn, J., Choi, H. and Lee, J.S., 2005, Large Eddy Simulation of Flow and Heat Transfer in a Channel Roughened by Square or Semicircle RIbs, ASME J. Turbomachinery 127, pp. 263~269 (SCI-E).

2. Ahn, J., Jung, I.S. and Lee, J.S., 2003, Film Cooling from Two Rows of Holes with Opposite Orientation Angles: Injectant Behavior and Adiabatic Film Cooling Effectiveness, Int. J. Heat Fluid Flow 24, pp. 91~99 (SCI).

1. Ahn, J., Jung, I.S. and Lee, J.S., 2000, Film Cooling from Two Rows of Holes with Opposite Orientation Angles: Heat Transfer, JSME Int. J. Series B 43(4), pp. 706~711 (SCI).


'발표 논문' 카테고리의 다른 글

국내 학술지  (0) 2023.03.03

53. 이상욱, 안준, 2022, CFD를 통한 슬릿 물결 핀이 장착된 소구경 핀-튜브 열교환기의 공기측 성능 분석, 대한기계학회논문집 B권 46(11), pp.603~610 (학진, SCOPUS).

52. 안준, 2022, 2021년 가스/스팀 터빈 분야 연구동향, 한국유체기계학회논문집 25(2), pp.60~65 (학진).

51. 안준, 2022, 2021년 유체기계 연구동향, 한국유체기계학회논문집 25(2) pp.45~47 (학진).

50. 김지혁, 안준, 2021, TRNSYS를 활용한 외기 조건에 따른 하이브리드 제습냉방 시스템 성능 및 실내 열환경의 동적 시뮬레이션, 대한기계학회논문집 B권 45(5), pp. 271~280 (학진, SCOPUS).

49. 안준, 2021, 2020년 가스/스팀 터빈 분야 연구 동향, 한국유체기계학회논문집 24(2) pp.70~74 (학진).

48. 안준, 2021, 2020년 유체기계 연구 동향, 한국유체기계학회논문집 24(2) pp.58~59 (학진).

47. 김지혁, 안준, 2020, 냉방공간의 구조를 고려한 다실 제어 제습냉방 시스템 시뮬레이션, 설비공학논문집 32(6), pp. 263~271 (학진).

46. 안준, 2020, 2019년 가스/스팀 터빈 분야 연구 동향, 한국유체기계학회논문집 23(2) pp.79~83 (학진).

45. 안준, 2020, 2019년 유체기계 연구 동향, 한국유체기계학회논문집 23(2) pp.65~66 (학진).

44. 김지혁, 안준, 2019, 가스엔진 열병합 시스템에 연계한 축열조의 열전달 특성, 설비공학논문집 31(7), pp. 322~331 (학진).

43. 김혜준, 안준, 2019, 제강공정의 배열 및 부생가스를 활용한 바이오 수소 생산 시스템의 동적 시뮬레이션, 대한기계학회논문집 B권 43(5), pp.371~378 (학진, SCOPUS).

42. 안준, 2019, 2018년 가스/스팀 터빈 분야 연구 동향, 한국유체기계학회논문집 22(2) pp.69~73 (학진).

41. 안준, 2019, 2018년 유체기계 연구 동향, 한국유체기계학회논문집 22(2) pp.53~54 (학진).

40. 안준, 장성일, 2019, 친유 처리를 한 접선 방향 입구를 갖는 사이클론 방식 유분리기의 성능 특성, 설비공학논문집 31(3), pp. 118~123 (학진).

39. 안준, 김혁주, 최규성, 2019, 순산소 재순환 연소를 채택한 3 MW급 CO2 회수형 보일러의 연소 특성, 대한기계학회논문집 B권 43(3), pp.221~229 (학진, SCOPUS).

38. 안준, 2018, 6 t/h급 모듈형 수관식 보일러 증발관 모듈의 유동 및 열전달 특성, 한국전산유체공학회논문집 23(4) pp.112~119 (학진).

37. 안준, 2018, 부분예혼합 저NOx Dual 버너가 설치된 수관식 보일러 연소실 수치해석, 한국연소학회논문집 23(4) pp.39~44 (학진).

36. 안준, 2018, 2017년 가스/스팀 터빈 분야 연구 동향, 한국유체기계학회논문집 21(2) pp.58~62 (학진).

35. 김무선, 정종덕, 장성일, 안준, 2017, 철도차량용 공기압축기의 열교환기 최적 설계를 위한 해석 연구, 설비공학논문집 29(11) pp. 570~579 (학진).

34. 안준, 김무선, 장성일, 2017, 냉각공기 유속 측정에 기반한 철도차량용 공기압축기 열교환기의 열전달 특성 분석, 설비공학논문집 29(9) pp. 447~454 (학진).

33. 안준, 김석연, 2017, 1 kW급 스털링엔진 고온 열교환기의 Fin 형상 개선 효과 분석, 대한기계학회논문집 B권 41(8) pp. 543~550 (학진, SCOPUS).
32. 김혜준, 김석연, 안준, 2017, 산업배열 및 부산물을 활용한 1톤급 바이오 수소 생산 시뮬레이터 동적 열설계, 설비공학논문집 29(5) pp. 259~268 (학진).
31. 안준, 2017, 2016년 가스/스팀 터빈 분야 연구 동향, 한국유체기계학회논문집 20(2) pp.89~92 (학진).

30. 신찬영, 김혜준, 안준, 2016, 에탄 열분해 공정에서 관형 반응기 내벽 온도 조건이 부산물 생성에 미치는 영향, 한국전산유체공학회논문집 21(3) pp.110~117 (학진).

29. 신찬영, 안준, 2016, 에탄 열분해 반응이 동반된 관형 반응기에서의 열전달 및 화학반응 특성, 한국전산유체공학회논문집 21(1) pp.43~49 (학진).

28. 안준, 박진우, 2015, 에틸렌 반응로에 대한 복합 열전달 해석, 설비공학논문집 27(10) pp. 515~519 (학진).

27. 장성일, 안준, 2015, 사이클론 방식 유분리기의 출구 튜브 설계, 설비공학논문집 27(8) pp. 402~408 (학진).

26. 장성일, 안준, 2014, 사이클론 방식 압축기 유분리기의 나선 피치 설계, 한국전산유체공학회논문집 19(4) pp. 8~13 (학진).

25. 안준, 김재율, 강병하, 2014, 지역난방에 연계된 하이브리드 제습냉방시스템의 경제성 분석, 대한기계학회논문집 B권 38(9) pp. 721~729 (학진, SCOPUS).

24. 안준, 김재율, 강병하, 2014, 지역난방에 연계된 하이브리드 제습냉방시스템의 주거환경에서의 성능 분석, 대한기계학회논문집 B권 38(7) pp. 571~579 (학진, SCOPUS).

23. 안준, 장준환, 2014, 4단 화격자 목재 펠릿 보일러의 부분부하 연소해석, 대한기계학회논문집 B권 38(4) pp. 365~371 (학진, SCOPUS).

22. 성민제, 안준, 2014, 유기랭킨사이클(ORC)을 위한 주전열면 열교환기의 채널 주름비에 따른 유동 및 열전달 특성, 설비공학 논문집 26(4), pp.158~162 (학진).

21. 성민제, 안준, 2013, 유기랭킨사이클(ORC)을 위한 주전열면 열교환기의 채널 종횡비에 따른 유동 및 열전달 특성, 한국전산유체공학회논문집 18(4) pp.35~40 (학진).

20. 강병하, 윤창호, 안준, 2013, 가정용 열병합 시스템의 국내 도입에 따른 온실가스 저감효과 예측, 설비공학 논문집 25(10) pp. 555~561 (학진).

19. 장준환, 안준, 신동훈, 정태용, 2013, Fe3Cl2 식각을 이용한 콘덴싱 보일러 잠열 열교환기의 응축 열전달 촉진, 에너지공학 22(3) pp. 307~311 (학진).

18. 장준환, 안준, 명현국, 2013, 전산유체해석을 이용한 Fan Filter Unit (FFU)의 가이드 베인 형상설계, 대한기계학회논문집 B권 37(7) pp. 709~716 (학진, SCOPUS).

17. 안준, 윤창호, 강병하, 2013, 실증 실험을 통한 하이브리드 제습냉방 시스템의 성능 분석, 대한기계학회논문집 B권 37(7) pp. 621~627 (학진, SCOPUS).

16. 안준, 황상순, 김종진, 강새별, 2012, 모듈형 2 t/h급 수관식 보일러의 열전달 특성, 대한기계학회논문집 B권 36(11) pp. 1127~1133 (학진, SCOPUS).

15. 이동균, 안준, 신승원, 2012, 관군 배열에서의 종간 간격이 열전달에 미치는 영향에 대한 수치 해석적 연구, 한국전산유체공학회 논문집 17(3) pp. 39~44 (학진).

14. 신명철, 안준, 강병하, 2012, 스털링 엔진용 재생 열교환기의 다공체 구조에 따른 성능 특성, 설비공학 논문집 24(5) pp. 415~421 (학진).

13. 안준, 김혁주, 최규성, 2012, 관류보일러에서 화염분할 VIStA 버너의 연소 특성, 대한기계학회논문집 B권 36(4), pp. 413-418 (학진, SCOPUS).

12. 안준, 김종진, 강새별, 2012, 모듈형 수관식 보일러를 위한 열교환 모듈의 열전달 특성, 설비공학 논문집 24(3) pp. 265~270 (학진).

11. 안준, 이윤식, 김혁주, 2012, 가정용 열병합 스털링 엔진을 위한 예혼합 버너의 연소 특성, 대한기계학회 논문집 B권 36(2) pp. 211~216 (학진, SCOPUS).

10. 안준, 이윤식, 김혁주, 2011, 1 kW급 LNG 스털링 엔진 연소실 수치해석, 한국전산유체공학회 논문집 16(3) pp. 88~94 (학진).

9. 김혁주, 안준, 송광섭, 2011, 매트 형태의 예혼합 촉매 버너에 의한 복사 건조 특성, 대한기계학회논문집 B권 35(7), pp. 735-742 (학진, SCOPUS).

8. 안준, 이윤식, 김종진, 2011, 수치해석을 이용한 HRSG 증기드럼 설계, 한국전산유체공학회 논문집 16(1) pp. 67~72 (학진).

7. 안준, 김종진, 2011, 금속섬유 버너를 채택한 0.5 t/h급 무연소실 보일러의 열전달 특성, 대한기계학회논문집 B권 35(2), pp. 215-220 (학진, SCOPUS).

6. 안준, 김혁주, 최규성, 2010, 관류보일러의 연소실에서 비예혼합 VIStA 버너의 연소 특성, 대한기계학회논문집 B권 34(5), pp. 547-552 (학진, SCOPUS).

5. 안준, 김종진, 강새별, 2009, 다단 연소 버너의 보일러 연소실에서의 연소 특성, 대한기계학회 논문집 B권, 33(10), pp. 767-772 (학진, SCOPUS).

4. 이수윤, 안준, 신승원, 2009, 전치 가이드베인 설치에 따른 열회수 보일러 입구온도 최적화, 한국전산유체공학회 논문집 14(3), pp. 1-8 (학진).

3. 안준, 황상순, 김종진, 강새별, 2009, 다중 버너를 채택한 수관식 산업용 보일러 연소실의 열전달 특성, 한국전산유체공학회 논문집 14(2), pp. 77-83 (학진).

2. 안준, 정인성, 이준식, 2001, 반대방향의 방향각을 갖는 2열 분사구조의 막냉각 특성 (II) - 분사비의 영향, 대한기계학회 논문집 B권, 25(8), pp. 1131-1139 (학진, SCOPUS).

1. 안준, 정인성, 이준식, 2001, 반대방향의 방향각을 갖는 2열 분사구조의 막냉각 특성 (I) - 배열의 영향, 대한기계학회 논문집 B권, 25(8), pp. 1122-1130 (학진, SCOPUS).

'발표 논문' 카테고리의 다른 글

국제 학술지  (0) 2023.03.03

+ Recent posts