43. Fakhrulrezza, M., Ahn, J. and Lee, H,-J., 2022, Thermal Design of a Biohydrogen Production System Driven by Integrated Gasification Combined Cycle Waste Heat Using Dynamic Simulation, Energies 15(9), 2976 (SCI).
41. Seon, G., Ahn, J. and Hwang, W., 2022, Analysis of the Impact of Flow Characteristics on the Separation Efficiency and Pressure Drop of a Cyclone-type Oil Separator, J. Mech. Sci. Tech. 36(1), pp.273~283. (SCI).
26. Ahn, J., Kim, M.S. and Jang, S., 2018, Effects of Cross-sectional Aspect Ratio of V-Shaped Ribs and Blockage Ratio on Heat Transfer in a Channel at a Low Reynolds Number, J. Mech. Sci. Tech. 32(11), pp.5465~5473. (SCI-E).
19. Sumit, B., Kim, Y., Ahn, J. and Lim, S.H., 2016, Fabrication of a Superamphiphilic SS-400 Oil Separator Surface using a Ag-doped ZnO Nanorod Coating, Sci. Adv. Material 8(8), pp. 1595-1602 (SCI-E).
18. Ahn, J. and Kim, H.J., 2016, Heat Transfer and Pressure Drop of a Gasket-Sealed Plate Heat Exchanger Depending on Operating Conditions across Hot and Cold Sides, J. Mech. Sci. Tech. 30(5), pp. 2325-2333 (SCI-E).
17. Ahn, J. and Kim, S.Y., 2016, Performance of Novel High Temperature Heat Exchanger for 1 kW Class Stirling Engine Considering Heat Recovery, Int. J. Air-Conditioning and Refrigeration 24(1), 16500007 (SCOPUS).
13. Kim, H.J., Lee, Y.S. and Ahn, J., 2013, Combustion Simulation of 1kW Class LNG Stirling Engine CHP System Considering Heat Recovery, Int. J. Air-Conditioning and Refrigeration 21(1), 1350007 (SCOPUS).
10. Ahn, J. and Kim, H.J., 2011, Combustion and Heat Transfer Characteristics at the Combustion Chamber of an Oxy-fuel Boiler for CO2 Capturing: a Numerical Simulation, Progress in CFD 11(3), pp. 210-215 (SCI-E).
4. Ahn, J., Choi, H. and Lee, J.S., 2007, Large Eddy Simulation of Flow and Heat Transfer in a Rotating Ribbed Channel, Int. J. Heat Mass Transfer 50, pp. 4937~4947 (SCI).
3. Ahn, J., Choi, H. and Lee, J.S., 2005, Large Eddy Simulation of Flow and Heat Transfer in a Channel Roughened by Square or Semicircle RIbs, ASME J. Turbomachinery 127, pp. 263~269 (SCI-E).
2. Ahn, J., Jung, I.S. and Lee, J.S., 2003, Film Cooling from Two Rows of Holes with Opposite Orientation Angles: Injectant Behavior and Adiabatic Film Cooling Effectiveness, Int. J. Heat Fluid Flow 24, pp. 91~99 (SCI).
1. Ahn, J., Jung, I.S. and Lee, J.S., 2000, Film Cooling from Two Rows of Holes with Opposite Orientation Angles: Heat Transfer, JSME Int. J. Series B 43(4), pp. 706~711 (SCI).
2월 16일 졸업식에서 실험실 졸업생 김지환 군이 우수 인재상을 수상하였습니다. 축하합니다~ 졸업, 취업 모두 축하드립니다.